Product Description
AudioSource Amp 100 is a power amplifier that is versatile enough to be used to drive speakers with different impedance ratings in stereo mode. Ot also allows bridging the 2 separate internal amp circuits for higher power sound to one channel. Though designed for home use, the bridge-application makes this suitable for use in bars and restaurants, where stereo channeling might not be considered, but high quality output is definitely an issue. Unswitched 400 Watts Power Outlet Bridgeable Outlets Rubber Vibration-Damping Feet AudioSource 1-Year Warranty Unit Dimensions - 2.9 x 16.5 x 9.25
Amazon.com Product Description
A favorite of audiophiles everywhere, the AudioSource Amp 100 two-channel power amplifier is built to deliver powerful music, pure and simple, with few extra controls to get in the way. Listeners can use the Amp 100 as an independent stereo amp (50 watts x 2 into 8 ohms) when used with a preamp, as a second zone amplifier in multi-room applications, or as a rear-channel amplifier in a 6.1- and 7.1-channel system. Combine the Amp 100 with an additional monoblock amp (the Amp 100 delivers 150 watts RMS of bridged power) and a preamp and listeners can independently drive two front left/right speakers or two rear speakers, further clarifying each channel to create dynamic, high-end sound. To connect additional components to the amp, use the included stereo inputs with automatic priority override (for connecting to a source such as a receiver, CD player, or preamplifier) or the auxiliary output for creating a multi-amp setup.
The amp boasts a precise frequency response of 20 Hz to 20 kHz and total harmonic distortion of 0.02 percent. Additional features include A, B, or A+B speaker selector switches, front-panel mounted volume and balance knobs, and five-way binding posts that work with both bare wire and banana plugs. Plus, at 16.5 by 2.9 by 9.25 inches (W x H x D), the device should fit comfortably in most rack mount or home entertainment setups. All AudioSource amps are backed by a two-year warranty on parts and labor.
What's in the Box
Amp 100 amplifier, user's manual.
Customer Reviews:
Good amp for people who will read a manual and think things through........2007-09-14
I've owned one of these amps now for about six months. All the complaints I've read in the reviews have come from people who obviously can't be bothered to read, pay attention, or think things through. I'm specifically referring to Auto Input Switching/Power, lack of features, and output power.
First, this is NOT an integrated amp. Nor is it designed to be used primarily as a standalone system. It is intended to be used as a node on a distributed music system. The feature set for this unit has this use in mind.
It can function as a standalone unit but if you are going to use it as such you need to use it with a pre-amp or with an input source that provides adequate line in, input selection and the tone/equalization control you want.
Second, the auto input switching. The manual isn't clear on this and the feature can't be switched off, which is why I docked it a star. But some reading and thought will provide the solution. The auto input feature is only on input 1. If you run your primary input to input 2 you will have no problem with auto switching cutting off your music during quiet passages or after the track has started. If you need to use multiple sources without the auto switch cutting the input then you need to use external input switching (see pre-amp above) and make sure the switch/pre-amp is fed to input 2 on the amp.
Auto-power on issues: This feature can be turned on or off by way of a selector switch on the rear panel of the amp. Default is on. This is in the manual.
"It doesn't have a sub out": No, but it does have a line out/pass-through for input 2 which can be used for a sub out.
"It isn't loud enough": One of two things is happening here; 1. The line in isn't sufficient to properly drive the amp. 2. The speakers aren't efficient enough. If you are running speakers with less than 90db sensitivity you won't get decent performance from this or any other "low power" amp. I'm using Athena AS-B1.2's and I'm getting more than adequate volume and bass response. I recommend these (under $100 if you shop around) or the Athena AS-B2.2. Klipsch, Infinity, JBL, and Yamaha all make some nice bookshelf units with 90db sensitivity or better that would work nicely with this unit. Just because this is an inexpensive amp doesn't mean you can get away with cheap speakers.
"There isn't enough bass": 1. Make sure the source is providing enough bass input. If the source doesn't have a tone control for bass you may need to use a pre-amp. 2. Use better speakers. When I first got my amp the speakers I had ordered for it were delayed, so I used some old early 80's bookshelf speakers to test the amp out.
Those speakers had no bass at all, or treble, or much midrange. Basically it sounded like an AM pocket radio. When the Athenas came in and were properly broken in the sound improved greatly. It also helps to have the speakers placed properly. If your speakers are rear vented they don't need to be in an enclosed space or pushed up against a wall (I see this all the time, even on store displays).
My experiences with this Amp: I ordered this amp with a pair of Athena AS-B1.2 bookshelf speakers for use in my home office. Inputs are from my PC (by USB DAC) and an iPod dock. Both inputs run through an audio switch to input 2 on the amp. The files played through it are a mix of OGG, FLAC, AAC, ALAC, WAV, and MP3. Mostly FLAC.
I was impressed by the fit and finish of the unit out of the box. I've seen many allegedly high end products that don't have this level of finish (Cameras, turntables, TV, PC Cases, Cars, etc.). The weight is substantial. As near as I can tell by looking through the vent slots the transformer takes up at least half the case. The power lines in my house aren't very clean and I have hum issues with most A/V equipment I own, but I have yet to hear any hum (in normal conditions) from this amp when turned all the way up, even when it's been plugged into outlets that give other equipment fits. The only way to get hum is to touch an input with a finger. In normal use the background is dead silent. Good power supply.
The design is minimalist and clean. The only panel controls are power, speakers, volume and balance. It is low profile and unobtrusive and gives off very little heat, even when left on (with the volume turned down). Mine doubles as a monitor stand, LCDs only.
There are two inputs but they are auto switched. The first input is the auto switch input, as stated above. This means that if an input is detected it will switch to input 1 over input 2. It is fairly sensitive and will switch back and forth during pauses or quieter passages in the music. If you listen to a lot of Jazz, classical, or chamber music with pauses and quiet bits you will definitely want to use input 2 to prevent it from dropping out during those passages.
There is an autopower feature as well. If left on it will cause the same problems with the amp cutting out during quiet passages as the autoinput switching. However it can be disabled by a selector switch on the back of the unit. This is clearly explained in the manual. The intent is to allow the unit to be powered on remotely when used with a distributed music system. If you want a standalone system disable this feature and turn it on and off manually.
The sound is deep and rich with excellent separation, depth, and imaging. There's plenty of bass for most of what I listen too (Jazz, folk, and classic rock), and outstanding midrange. Treble does seem to roll off a bit, but that may be the speakers. Volume is more than enough to shake the walls and floor of my office and the music can be heard clearly throughout the second floor of the house. Personally I think it's more than loud enough to use as a primary system if you have a smallish living room (but with larger speakers). I haven't heard any distortion at loud volumes, but excessive line in might change that. More importantly to me the sound doesn't get muddy at low volume levels. It remains clear and detailed. I have no problem listening to most of my collection for hours on end with this amp while I work, or kicking back on the office sofa with some whiskey.
Most of my music files on the PC are lossless, but I do have a few dogs among the MP3 and WAV files. It's no great feat for an amp to sound good with a lossless file so I ran a few of the nastier files through it to see how it did. For the most part it took the edginess off most of the rougher files and made them almost pleasant to listen to. There are a few bad tracks that are best left to regular PC speakers, and a few FLAC files ripped from CD where bad mastering shows up more clearly now. Win some, loose some.
Nitpicks: My amp pops when turned on and off, which has the potential to damage speakers. It's not loud, but I turn the volume down before I hit the switch. I would prefer a manual input switch. Price has changed by as much as $30 on Amazon over a relatively short time.
Before buying this I listened to a friend's office setup with a Super T-Amp and a pair of Infinity Bookshelf speakers. To my ears the Amp100 sounds just as nice at lower volumes plus it can pack more of a punch when called for. It's not as compact as the Super-T or as stylish, but it fills my needs.
It's okay..............2007-09-10
It's not a bad amp, but its input to output ratio is pretty low. I have it hooked up to my surround sound to feed my outdoor patio speakers. It works well enough but if I turn down the surround sound inside, and turn up the amp. Well the amp output isn't that great. It works, but I'm sure theres better out there.
Plain and Simple and Works Well.......2007-09-06
I am using this amp to control a set of speakers in a different room from my receiver. It synchs well with my Harmony remote and so far I have not had any problems or unpleasant surprises. It's a plain vanilla component with few bells and whistles and so far does what it does well.
I noticied the Amazon price has fluctuated over time so be mindful of that.
Does the Job for me.......2007-08-05
Great amp. Small,so it fits into a tight location with plenty of power to drive my two bookshelf speakers. Read all those reviews about the power being late to come on but I haven't had that problem. As far as I'm concerned this is a great feature. It saves power and I never have to turn the amp on and off - it does that itself. It comes on before the picture on my 40 inch Sony Bravia HDTV so I don't miss a thing. If you're looking for a small amplifier for a good price, I don't think you can beat this little jewel.
Perfect for my application.......2007-07-24
In my home I have speakers in the main floor of the house and out on my deck as well. While my receiver has speaker "a" and "b" selections, there is no individual volume control for each zone. This resulted in my inside speakers being deafeningly loud and the deck speakers barely audible. That's where this great little amp came into play. This unit has made it possible to enjoy a steady volume of music both inside and out. Once I tweaked the volume on the amp100 to match the inside of the house, I simply control the master volume on the receiver and both the inside and outside speakers adjust in tandem. The fact that it automatically powers on as soon as I activate the "b" speakers makes it perfect for my application.
Product Description
2 x 900W rms at 4 ohms 1800W max at 4 ohms bridged Dual switchable bass boost Dual variable electronic crossover network Tri-mode capable Gold-plated RCA inputs High/low pass filter controls 10 5/8'' W 1 1/2'' H x 12'' D
Customer Reviews:
OVERRATED.......2007-06-13
this amp does not put out the power it says it does. this manufacturer obviously does not know what rms power really is. this amp is way overrated and wont even put out half of the power specified.
Pyle 1800 Watt Amplifier.......2007-06-08
I would not recomend the Pyle 1800W 2 Channel Mosfet amplifier to any of my friends to buy. It might be cheap, but if your going to spend the money you might as well spend it on a product thats worth the money. My main dissapointment was in how quikly it overheats. I currently run a 1000W sony amplifier in my truck to power the subwoofers. What over heats with the sony amp in 10 minutes, over heats in about 30-60 seconds with the pyle amp (and sony amps are known for overheating). Just look at those numbers and also be sure to look up the RMS of the pyle amp, its horrible.
Amazon.com Product Description
Feel the music as you drive with the two-channel, non-bridgeable Boss Audio CH150 MOSFET amplifier, which provides an RMS power range of 40 to 100 watts over two channels. It features a heavy-duty aluminum alloy heatsink, soft turn-on circuit, remote on/off circuit, and continuously variable input gain control. A MOSFET amplifier offers superior thermal stability, which provides the power supply a fast response, excellent linearity, and high efficiency.
Tech Talk RMS versus Peak Power: Peak power is measured by a brief musical burst (such as a crashing cymbal) and refers to the maximum amount of power that a device can produce from such a burst. However, a more reliable specification is RMS (root square mean) power, which measures the maximum continuous power that an audio device can produce. With a higher RMS figure, your music will sound cleaner as well as louder.
Product Description
BOSS Audio Systems is a full line manufacturer of mobile electronics equipment. The company is focused on developing the best price/performance ratios in CD and cassette receivers, power amplifiers, loudspeakers, and signal processors. Cosmetic design is a top priority and BOSS is recognized as a trendsetter in the car audio industry. BOSS Audio Systems also has high performance installation accessories such as RCA interconnects, power cable, speaker wire, power distribution devices, and amplifier installation kits.CHAOS CH150 is a 2 Channel High Power Amplifier.
Customer Reviews:
Great little amp for a great price........2007-03-26
I bought this amp to power my new component speaker set-up and I have been very satisfied with it. It's small in size and easy to mount virtually anywhere.
Very dissatisfied........2007-02-10
This item was not properly described. It is intended for automotive use only, but the description did not state that. I wanted something for use with 110 volts AC. As a result, I had to return it and eat the cost of shipping both ways.
Amazon.com Product Description
Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.)
If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver.
You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source.
The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz.
Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal.
What's in the Box
Power amplifier, an AC power cord, and a user's manual.
Product Description
100 watts x 2 channels into 8 ohms / Input level adjustment / Preamp-level input-output loop / Auto power on-off / Pass-through Onkyo's proprietary Wide Range Amplifier Technology (WRAT) maximizes signal accuracy and resolution A back-panel automatic power-on/off switch lets you set the amp to turn on when it senses an incoming audio signal, or when you power a component connected to the 12-volt trigger input Back panel also offers an input level control knob, and banana-plug compatible speaker terminals Preamp-level input/output loop lets you daisy-chain multiple M-282s, and play the same source in several rooms Dimensions - 5-3/4H x 17-1/8W x 13-1/16D Warranty - 2 Years
Customer Reviews:
outstanding 2-channel amp.......2007-09-19
I bought this 2-channel amplifier to drive a pair of in-ceiling speakers in another room. For my application, this amp is perfection. I'm certainly glad I didn't buy the similarly-priced but much-less-powered unit from Audio Research.
The output power is phenomenal - noticeably stronger than the 150w per channel output spec from my Sony ES reciever. Either Yamaha is being conservative or Sony is misleading. The sound quality is very clear, low noise, and free of distortion even at loud passages. Frankly I'm stunned at the performance for this low a price point.
This unit is beautifully finished, and looks at home with the rest of my components. It's actually smaller than I expected as well. The front of the unit has a hard power switch, and a standby/on indicator that is red on standby (soft power off) and orange when on.
The rear of the unit has a 2-channel RCA input, a 2-channel RCA output (passthrough), one set of speaker connectors (accepts banana-type and wire), a 12v trigger input, and the power cord input. There is an input level adjustment (essentially a volume control) but in my application, I found it best to set this at maximum volume and let my in-wall volume control adjust the level. There is also a switch to control auto-power settings: disabled (power is controlled by the front switch), audio (front switch remains on, unit changes from standby to on when audio signal is detected), and 12v (external 12v trigger). There is quite a long delay from power-on to on, and in my setup, I chose the OFF mode - where I turn the unit on from the front when I want to use it. The supplied power cord is quite hefty and probably overkill.
Note that unlike several other reviews here, my unit did not get very hot - certainly far from the heat generated by my Sony ES receiver. Nor did I experience a 60Hz hum when the unit entered standby.
Finally, although some reviews say this unit has been discontinued, it still appears on the official Onkyo web site, and availability seems good. So I would say it's not discontinued.
In summary, this is the "perfect" 2-channel audio amp - highly recommended without reservation. And an unbelievable value for near-audiophile performance.
AMPed system.......2006-08-04
I have been using this AMP for the better part of three years. It has never failed, overheated, or given an unsatisfactory performance. It looks sexy and performes like a pro. You will not be dissapointed; I'm not.
Onkyo.......2006-02-01
Onkyo is a relatively large japanese audio maker.
Onkyo is popular but middle class maker.
Accuphase and Luxman are the best japanese audio makers.
Good, But I am glad I did not buy anything cheaper.......2006-01-20
I was looking for a "cheap" amp to drive my 2nd zone "background" music speakers. My price point was around $200 and this unit has a good look to it, so it would fit in next to my more "up scale" B&K separates.
The Good:
It came double boxed and packed well, (always a good sign).
It has a hi-end look to it, (good fit and finish).
The sound is clear and clean, no hum, or hiss (from the speakers, see the bad)
It makes you understand why you spent 10 times as much for your main amp.
The Bad:
The thing is a space heater even when in "stand by" mode the heat is coming from the inexpensive power transformer.
The two tone LED is red when in "stand by" and a cheap orange when "on" I guess green or blue would be better for "on" for me.
I found that when I turned everything "off" to go to bed the transformer has a 60Hz hum to it that can be heard if you are standing a few feet away.
Conclusion:
It seems like a good amp, and if I compare it to the price I paid for my B&K amp it is a good value. Time will tell if the "budget" components will hold up over time. Because of the heat and hum from the transformer I would suggest not using this unit as part of your main music or surround system. I was going to give it 4 stars for looks and features but the heat and hum drag it down to an average 3.
Great quality amp.......2003-04-05
I bought this amp to drive a passive homemade sub and it has done nothing but please me. I'm running it at 4ohms to each channel, and it pumps out serious power. Despite the lower resistance, its heat dissipation is lower than my receiver. I do not believe Onkyo's numbers for this amp, they have to be higher. When I hooked it up to my main front speakers, it revealed an exellent range of frequencies at any volume. This piece is a great example of Onkyo quality for a low price, I'm still curious as to why they discontinued it.
Product Description
Pyramid Car Audio prides itself as being the most affordable solution to car audio. The founders of Pyramid over two and a half decades ago developed a notion of how to bring affordable audio products to the US market. With this constant vision in mind, it took only a few short years before Pyramid was considered the worldwide leader of affordable audio products. Pyramid offers this 600W 2-channel amplifier. It provides automotive type fuse protection and features hi-level low impedance MOLEX input.
Customer Reviews:
Great for about 2 months.......2005-07-02
I ordered this amp and it worked like a charm for two months. After that, it is just dead in the water. I have power lights and a local stereo shop checked everything out and confirmed that the amp is bad. Leave this amp alone because it is a waste of money.
Pyramid did well with this one!.......2003-02-05
Mind you this isnt the sleekest Pyramid Amp ever made but man does it shake the ground with a good pair of Subs!
I bought this AMP three years ago and used it to push two 15" RockFord Fosegate Dual Voice Coil Subs. I was shocked to see that it is still in production but pleasantly so! This was one of the best AMPs I ever bought. It out performs my MTX Thunder 4200x2. Mine was stolen about two years ago and was so happy to see this AMP I bought it for my Wifes Car.
Product Description
Power Acoustik is the leading manufacturer of audio products, producing the finest Car Stereo Decks, Amplifiers, Equalizers, Crossovers, Speakers, Woofers and component systems that money can buy. Power Acoustik products offer more than just stunning good looks. They offer finest leading technology and science that you need to build the best ground-pounding system with unparalleled clarity and vibrancy, each crafted with the quality & workmanship that you've come to expect from Power Acoustik. PRODUCT FEATURES:Super cool blue LED;Chrome top plate panel.
Customer Reviews:
its a good amp.......2007-05-13
i'v used this amp with my Dual 12" subs for a coupple months. although i dont like the subs the amp pushes the 1100 watt subs great, and it dosent drain my battery. this is a good way to go for a cheep hi watt amp
good amp for the price paid.......2007-01-18
well let's just start by saying that this amp kicks the subwoofers like tyson , it deliver a clean bass all the way down to 30 hz. it's not a 1200 watts rms amp like it says on the box maybe 200 watts rms and on bridge 350 rms mono . wich is a good delivery for any amp .it does not get very hot and
until now, one month of use has never reset or failed to me .
i hope this review help you
Amp overheats when bridged with dual subwoofers.......2007-01-11
I am running dual subwoofers with this amp and it overheats in about 10-20 minutes. The amp burns your hand to the touch after being on for a short while. It begins to clip and finally shuts down due to the heat. It is supposed to have 4ohms when it is bridged and my subs handle 4ohms(as do most dual brand enclosed subwoofers). The sound quality is great, and I would have been very satisfied with the amp if it weren't for that serious overheating problem(which could end up burning the amp out over time).
What I don't understand is why this amp overheats when my old dual amp, which had way less peak handling power(420 peak watts) could handle the subs for over a year (was fried due to the low handling power of the amp and the higher wattage draw of the subs) with the exact same wiring and this amp cannot? If this keeps up I may have to scrap this amplifier and go for a monoblock amplifier instead. due to my experience with this amp, my faith in power acoustik has dropped significantly.
acoustik amp.......2006-11-14
i just hooked up this amplifier to the dual audio subwoofers (also sold on amazon) and it sounds wonderful! I would definately recommend this amp to everyone!
Simply Amazing .......2006-03-22
I am just a newbie in the world of car audio. I need something poweful for a low price. So when I saw this amp for a low price, I had to get it and man was I not diappointed. This thing is amazing and with my 12' Blitz Speakers that I hooked up, it is like my car is alive. If you are looking for a good quality amp at a lower price, I would HIGHLY RECOMMENDED this amp. You will not be disappointed.
Amazon.com Product Description
Hailing from Pyle's Chopper series, the PLA-2200 two-channel car amplifier is designed from the ground up to deliver the power, performance, and flexibility demanded by the modern car enthusiast. The amp is outfitted with two channels that pump 80 watts of RMS power each into 4 ohm speakers or 140 watts each into 2 ohm speakers, with a max power delivery of 700 watts per channel. As an alternative, listeners can bridge the channels into a single 1,400-watt max output--ideal for driving a heavy-duty subwoofer. Also along for the ride are built-in high- and low-pass electronic crossovers (40 to 250 Hz) for precise filtering and a variable input level (gain) control that lets you match the outputs of your head unit with the amplifier. Add in a remote bass boost that increases the bass level by as much as 18 dB and you have a powerful, versatile device that strives to accommodate all types of equipment.
Internally, the PLA-2200's thermally stable Mosfet transistors are built to withstand prolonged exposure to high temperatures. However, should the amp reach an excessive operating temperature, the unit's thermal protection circuit is designed to kick in, thus shutting down the amp until the conditions cool off. This protective feature dovetails with the amp's other protection circuits, which include both overload and short circuit protection.
Other features include gold-plated RCA inputs and outputs for high-impedance speakers, a slim design that's installs easily in most vehicles, power and protection LED indicators, anti-thump and soft turn-on circuits, and a remote turn-off function that coordinates with the head unit to save current consumption. The PLA-2200 measures 10.63 by 1.42 by 8.75 inches (W x H x D) and carries a two-year warranty on parts and labor.
What's in the Box
PLA-2200 amplifier, mounting hardware, user's manual.
Product Description
2 x 700W rms at 4 ohms 1400W max at 4 ohms bridged Dual switchable bass boost Dual variable electronic crossover network Tri-mode capable Gold-plated RCA inputs High/low pass filter controls 10 5/8'' W 1 1/2'' H x 8 3/4'' D
Customer Reviews:
amp.......2007-06-10
over heats at times but cant beat the price!! and doesnt happen all the time just if you use it longer than 20 minutes or so
Highly Recommended.......2007-01-10
My 1400 - Watt amplifier was a great buy. Its size is very convenient and its performance is so far, excellent. I would recommend this product to any one who is looking for an affordable priced amplifier which offers an excellent rich sound to your car stereo when you are rolling around.
Rocky
Average customer rating:
|
Audiobahn A2300HCT 2400-Watt 2-Channel High-Current Amplifier
Manufacturer: AudioBahn
ProductGroup: CE
Binding: Electronics
 Car Accessories
| Refurbished & Used
| Special Features
| Electronics Features
| Electronics
Audio & Video
| Refurbished & Used
| Special Features
| Electronics Features
| Electronics
Amplifiers
| Car Audio & Video
| Car Electronics
| Categories
| Electronics
| Crossovers
| Custom-Fit Amp Housings
| Equalizers
| Mono Subwoofers
| Multichannel Amplifiers
| Two-Channel Amplifiers
Product Features:
- High Current Circuitry
- PWM MOSFET Power Supply
- Double-Sided Glass Epoxy Circuit Board
- Signal to Noise Ratio: >100dB (+/- 1dB)
- Frequency Response: 10Hz 20KHz
ASIN: B00016PUOE |
Product Description
Made for those of you that plan on taking over the world. Made to power multiple speakers and are 1ohm stable. Audiobahn has added heat sink and Audiobahn nameplate illumination to make this award-winning amp better than ever.
Product Description
Pyramid Car Audio prides itself as being the most affordable solution to car audio. The founders of Pyramid over two and a half decades ago developed a notion of how to bring affordable audio products to the US market. With this constant vision in mind, it took only a few short years before Pyramid was considered the worldwide leader of affordable audio products. Pyramid offers this 240W 2-channel amplifier. It provides automotive type fuse protection and features speaker output MOLEX connector.
Average customer rating:
|
Plasma Sphere Series 2-CHANNEL Amplifier
Manufacturer: POWER ACOUSTIK
ProductGroup: CE
Binding: Electronics
Component Amplifiers
| Receivers & Amplifiers
| Audio & Video
| Categories
| Electronics
Office Electronics
| Refurbished & Used
| Special Features
| Electronics Features
| Electronics
Product Features:
- Synchronized lightning pulse dish
- Remote dash mount bass knob control
- Three way protection circuit with system distress indicator
- Full selectable crossover with variable high/low subsonic filtering
- High/low level inputs with floating ground and line output
ASIN: B0009ETWLA |
Product Description
Reach the lightning sensation with the new Power Acoustik Plasma Sphere amps!
Electronics:
- Audiovox D1708PK 7" Ultra Slim Line Portable DVD Player with Bonus Pack
- Audiovox D1718PK 7" Portable DVD Player with Bonus Headphones and Car Kit
- Audiovox D1718PK 7" Portable DVD Player with Bonus Headphones and Car Kit
- Canon i950 Photo Printer
- Canon PIXMA MP170 All-In-One Photo Printer
- Canon Selphy CP400 Photo Printer
- Canon Sure Shot 105S Zoom 35mm Camera
- Canon Sure Shot 105S Zoom 35mm Camera
- Canon Sure Shot 85 Platinum Zoom 35mm Camera
- Canon Sure Shot 85 Platinum Zoom 35mm Camera
Electronics
Electronics
Polk Audio Atrium 45 All-Weather Speaker, White Finish (Pair)
BIC America DV62si Bookshelf Speakers (Pair, Black)
AudioSource LS200 Four-inch Full Range Indoor/Outdoor Speakers (Pair)
AudioSource AS6C 6-Inch In-Ceiling Speakers (Pair)
AudioSource EQ200 10-Band Stereo Graphic Equalizer
AudioSource Pre One/A Stereo Preamplifier
Dayton SCP-10 Speaker Cable Pair w/Bananas 10 ft.
Dayton RCA-1.5 RCA Audio Cable 1-1/2 ft.
Dayton RCA-6 RCA Audio Cable 6 ft.
![Planet Earth - The Complete BBC Series [HD DVD]](http://images-eu.amazon.com/images/P/B000MRAAJW.01.THUMBZZZ.jpg)
